Bereits vor einiger Zeit haben wir einen Artikel zum Thema UPS Monitoring veröffentlicht. In der Zwischenzeit wurden einige neue Geräte zum Check Plugin hinzugefügt. Dabei handelt es sich um UPS-Geräte und Energy Stations. Hier die komplette Liste:
Netvision Energy Stations
Delta
Benning
Netman
Plurys
Überwachen Sie Ihrer UPS-Geräte und stellen Sie die entsprechenden Perfromance-Daten dar (Belastung, Input- Output usw.)
Anbei eine kurze Beschreibung wie das Plugin genutzt werden kann:
check_snmp_ups.pl –help
SNMP UPS Monitor for Nagios version 3.2.0
GPL Licence, (c)2015 Juergen Vigna
Usage: neteye-plugins/plugins/check_snmp_ups.pl [-v] -H -C <snmp_community> [-2] | (-l login -x passwd [-X pass -L , ]) [-p ] -T (general|netvision|socomec|socomecnew|generex|chloride|apcats|apcups|mge|nvenergy|delta|benning) [-B <warn,crit>] [-O <warn,crit>] [-A ] [-f] [-t ] [-o ] [-i ] [-V]
-v, –verbose
print extra debugging information
-h, –help
print this help message
-H, –hostname=HOST
name or IP address of host to check
-C, –community=COMMUNITY NAME
community name for the host’s SNMP agent (implies v1 protocol)
-2, –v2c
Use snmp v2c
-l, –login=LOGIN ; -x, –passwd=PASSWD
Login and auth password for snmpv3 authentication
If no priv password exists, implies AuthNoPriv
-X, –privpass=PASSWD
Priv password for snmpv3 (AuthPriv protocol)
-L, –protocols=, : Authentication protocol (md5|sha : default md5)
: Priv protocole (des|aes : default des)
-P, –port=PORT
SNMP port (Default 161)
-T, –type=general|netvision|socomec|socomecnew|apcats|apcups|mge|nvenergy|delta|benning
Environemental check :
general : general UPS status
netvision : voltage,battery,load and alerts
socomec : voltage,battery,load and alerts
socomecnew: voltage,battery,load and alerts
generex : battery,status,output and alerts
chloride : battery,status,output and alerts (same as generex)
apcups : battery,input voltage,output load
apcats : input source, load
mge : battery,status,input voltage,output voltage and alerts
nvenergy : netvision energy stations battery,input voltage,output
delta : status,output load (from generex)
benning : status of Benning Energy stations
netman : generex reduced no load and capacity data
plurys : netvision without capacity
-B, –battery=<%battery left>
Warning,Critical minimum battery level in percent (default: 80,50)
-O, –load=
Warning,Critical Maximum Load of UPS before giving a warning (default: 75,90)
-A, –voltage=
Warning Minimum Voltage of UPS before giving a warning (default: 200)
-o, –output_lines= Number of output lines to check (default: 1)
-i, –input_lines= Number of input lines to check (default: 1)
-f, –perfparse
Perfparse compatible output
-t, –timeout=INTEGER
timeout for SNMP in seconds (Default: 5)
-V, –version
prints version number
I have over 20 years of experience in the IT branch. After first experiences in the field of software development for public transport companies, I finally decided to join the young and growing team of Würth Phoenix. Initially, I was responsible for the internal Linux/Unix infrastructure and the management of CVS software. Afterwards, my main challenge was to establish the meanwhile well-known IT System Management Solution WÜRTHPHOENIX NetEye. As a Product Manager I started building NetEye from scratch, analyzing existing open source models, extending and finally joining them into one single powerful solution. After that, my job turned into a passion: Constant developments, customer installations and support became a matter of personal. Today I use my knowledge as a NetEye Senior Consultant as well as NetEye Solution Architect at Würth Phoenix.
Author
Juergen Vigna
I have over 20 years of experience in the IT branch. After first experiences in the field of software development for public transport companies, I finally decided to join the young and growing team of Würth Phoenix. Initially, I was responsible for the internal Linux/Unix infrastructure and the management of CVS software. Afterwards, my main challenge was to establish the meanwhile well-known IT System Management Solution WÜRTHPHOENIX NetEye. As a Product Manager I started building NetEye from scratch, analyzing existing open source models, extending and finally joining them into one single powerful solution. After that, my job turned into a passion: Constant developments, customer installations and support became a matter of personal. Today I use my knowledge as a NetEye Senior Consultant as well as NetEye Solution Architect at Würth Phoenix.
Scenario NetEye 4 is a comprehensive monitoring platform which natively supports Business Processes. A Business Process is an abstract view of a customer’s business from the Application point of view. Usually, it’s a collection of Icinga 2 checks aggregated by Read More
On February 3rd and 4th, 2024, we attended FOSDEM, a major event where thousands of free and open-source software developers from around the world gather to exchange ideas and collaborate. This year I dedicated much of the second day to Read More
Introduction: Unveiling Elastic APM in Containerized Environments In today's dynamic digital landscape, where every interaction matters, understanding the intricacies of application performance has become paramount. Elastic APM is a powerful toolset within the Elastic Stack included in the NetEye SIEM Read More
In this article, we’ll explore how to configure the “Agent Binary Download” setting and set up your own artifact registry for binary downloads within a NetEye cluster. Prerequisites Before we begin, ensure you have the following prerequisites in place: Your Elastic Agents Read More
We fixed the following issues in the integration between NetEye and Alyvix. Test Case file selection dropdown We fixed an issue in the Test Cases view for which, when switching between the Test Cases of different nodes, the wrong Test Read More