Blog entries by technology: CentOS

14. 12. 2023 Mirko Morandini Service Management

EriZone Servicedesk: Upgrade to RockyLinux9/RHEL9 (CentOS7 EOL in June 2024)!

Dear EriZone customers! Our legacy servicedesk system EriZone currently runs on CentOS7 or Red Hat Enterprise Linux (RHEL) 7. These operating systems will not get any security fixes after June 2024. For anyone planning on keeping EriZone running beyond this date, we highly recommend you contact us for an upgrade to Rocky Linux 9. As…

Read More
15. 12. 2022 Juergen Vigna NetEye

Migrate a NetEye 4 Server from CentOS 7 to RHEL 8 (v4.22->v4.23) with EFI Boot

When upgrading NetEye 4 from version 4.22 to version 4.23, the main focus is the upgrade/change of the operating system from CentOS 7 to the new RHEL 8 operating system. Normally you can proceed as explained in the Upgrade section of the user guide since NetEye 4 uses the “normal” BIOS boot sector with grub….

Read More
17. 09. 2020 Mirko Morandini Unified Monitoring

EriZone: CentOS 6 EOL: Plan Your Migration to CentOS 7 Now!

Dear EriZone customers! Some of your EriZone VMs are still working on CentOS 6, which will reach its End of Life on November 30th, 2020. This means that no new security or bugfix updates will be released after this date. You can check this by running the command: rpm -q centos-release which will tell you…

Read More
13. 12. 2019 Juergen Vigna Log-SIEM, NetEye, Unified Monitoring

Securing scp/sftp Access to Your Centos7/Redhat7 Server

Sometimes you just need to temporarily grant access to a user to copy some files to your server. But no user should have access to the shell. For sftp this is quite simple (see below), but for scp it’s not that trivial. Also, you probably want to set the user up in a directory with…

Read More
09. 04. 2018 Davide Bizzarri Business Service Monitoring, NetEye

How to Deploy NRPE on CentOS 7 with Ansible

Introduction When you need to monitor multiple machines, it’s a lot of work to install each machine manually.  Instead, you want to run just a single command, or click a few buttons, to configure all those machines at once, and then keep them updated over time.  This can be achieved with a bash script, so…

Read More
20. 06. 2017 Thomas Forrer NetEye

CentOS updated to version 6.9 for all NetEye Versions

After a long test phase today we released a new version of our NetEye base OS packages, which is CentOS 6.9. It provides various bug fixes and improvements. For a change log see CentOS 6.9 Release Notes. There are no problems for customers continuing using CentOS 6.8.

Read More
20. 06. 2017 Thomas Forrer NetEye

CentOS updated to version 6.9 for all NetEye Versions

After a long test phase today we released a new version of our NetEye base OS packages, which is CentOS 6.9. It provides various bug fixes and improvements. For a change log see CentOS 6.9 Release Notes. There are no problems for customers continuing using CentOS 6.8.

Read More
20. 06. 2017 Thomas Forrer Downloads / Release Notes, NetEye

CentOS updated to version 6.9 for all NetEye Versions

After a long test phase today we released a new version of our NetEye base OS packages, which is CentOS 6.9. It provides various bug fixes and improvements. For a change log see CentOS 6.9 Release Notes. There are no problems for customers continuing using CentOS 6.8.

Read More
12. 07. 2016 Sandro Santinato Downloads / Release Notes, NetEye

CentOS updated to version 6.8 for all NetEye Versions

After a long test phase today we released a new version of our NetEye base OS packages, which is CentOS 6.8. It provides various bug fixes and improvements. For a change log see CentOS 6.8 Release Notes. There are no problems for customers continuing using CentOS 6.7.

Read More
12. 07. 2016 Sandro Santinato NetEye

CentOS updated to version 6.8 for all NetEye Versions

After a long test phase today we released a new version of our NetEye base OS packages, which is CentOS 6.8. It provides various bug fixes and improvements. For a change log see CentOS 6.8 Release Notes. There are no problems for customers continuing using CentOS 6.7.

Read More
12. 07. 2016 Sandro Santinato NetEye

CentOS updated to version 6.8 for all NetEye Versions

After a long test phase today we released a new version of our NetEye base OS packages, which is CentOS 6.8. It provides various bug fixes and improvements. For a change log see CentOS 6.8 Release Notes. There are no problems for customers continuing using CentOS 6.7.

Read More
14. 04. 2014 Juergen Vigna Downloads / Release Notes, NetEye

CentOS updated to version 5.10 for all NetEye versions

The base OS packages have been updated to use 5.10 version of CentOS, which provides various fixes to the base os packages. There is no problem for any customer continuing using 5.9 of CentOS.

Read More
14. 04. 2014 Juergen Vigna NetEye

CentOS updated to version 5.10 for all NetEye versions

The base OS packages have been updated to use 5.10 version of CentOS, which provides various fixes to the base os packages. There is no problem for any customer continuing using 5.9 of CentOS.

Read More
14. 04. 2014 Juergen Vigna NetEye

CentOS updated to version 5.10 for all NetEye versions

The base OS packages have been updated to use 5.10 version of CentOS, which provides various fixes to the base os packages. There is no problem for any customer continuing using 5.9 of CentOS.

Read More
06. 05. 2013 Juergen Vigna Downloads / Release Notes, NetEye

Updated to CentOS 5.9 for all NetEye Releases

With the recent release of NetEye 3.4 also the operating system has been updated to the 5.9 release of CentOS. This has been done for all NetEye Releases that means that also for pre 3.4 NetEye Version the OS can be updated to the new fix release 5.9 of the OS.

Read More

Archive