Huawei si sta facendo largo nel campo dei dispositivi di rete tra ben noti colossi come Cisco, HP e Juniper. Per questo motivo ho provato a collegare un Huawei 2751 S2751- 28TP-PWR-EI-AC a NetEye e vedere quali informazioni possono essere recuperate.
Il dispositivo che ho testato è uno switch con 24 porte a 100Mbit e 4 porte Gigabit.
Per prepararlo ho impostato una configurazione base e mi sono assicurato che gli agenti SNMP e SSH siano attivi.
Il primo strumento della Suit di NetEye che assimila le informazioni dello switch è il Modulo di Discovery basato su NeDi
Ho dovuto quindi sistemare alcune impostazioni nel file nedi.conf per poter analizzare correttamente i dati dello switch:
1. La Community SNMP
2. Attivare l’accesso a CLI
3. Impostare i dati SSH
Se azioni una discovery sullo switch verrà trasmesso e visualizzato un intenso flusso di dati su NetEye Discovery.
Dal momento che ho anche attivato l’accesso SSH e CLI, NeDi può creare un backup della configurazione dello switch e archiviarla sul server NetEye, così che possa essere richiamata o comparata alle configurazioni successive.
Dopo che lo switch di Huawei è stato rilevato e registrato, posso aggiungere il dispositivo al controllo e monitorarlo con le opportune verifiche.
La via più semplice per importare i dati dal dispositivo è quella di usare il wizard “NeDi Import” che permette di importare, monitorare e assegnare profili host.
A questo punto, aggiunto lo switch al monitoraggio, posso interrogare I dati con le opportune verifiche.
Dato che SNMP era già stato attivato all’inizio, il protocollo può essere utilizzato per il monitoraggio.
La check list proposta sopra è stata già testata e ha prodotto i risultati visibili in grafici PNP4Nagios.
Il check “SNMP_Interface_Table” mostra una panoramica delle informazioni più importanti ed è, se configurato correttamente, in grado di indicare le divergenze dai valori di default.
Questa è una panoramica dei test che ho fatto sullo switch. Spero che questo post possa esservi d’aiuto.
Hi, I’m Patrick.
Since I was a little boy i love to diassemble and reassemble things...
So I did with my first 386SX back in the 80s... and I still do with my i7 up till now.
I worked in the Service Desk then grew up to a DBA and work now as Integration Consultant at Würth Phoenix.
Author
Patrick Agreiter
Hi, I’m Patrick.
Since I was a little boy i love to diassemble and reassemble things...
So I did with my first 386SX back in the 80s... and I still do with my i7 up till now.
I worked in the Service Desk then grew up to a DBA and work now as Integration Consultant at Würth Phoenix.
Scenario NetEye 4 is a comprehensive monitoring platform which natively supports Business Processes. A Business Process is an abstract view of a customer’s business from the Application point of view. Usually, it’s a collection of Icinga 2 checks aggregated by Read More
On February 3rd and 4th, 2024, we attended FOSDEM, a major event where thousands of free and open-source software developers from around the world gather to exchange ideas and collaborate. This year I dedicated much of the second day to Read More
Introduction: Unveiling Elastic APM in Containerized Environments In today's dynamic digital landscape, where every interaction matters, understanding the intricacies of application performance has become paramount. Elastic APM is a powerful toolset within the Elastic Stack included in the NetEye SIEM Read More
In this article, we’ll explore how to configure the “Agent Binary Download” setting and set up your own artifact registry for binary downloads within a NetEye cluster. Prerequisites Before we begin, ensure you have the following prerequisites in place: Your Elastic Agents Read More
We fixed the following issues in the integration between NetEye and Alyvix. Test Case file selection dropdown We fixed an issue in the Test Cases view for which, when switching between the Test Cases of different nodes, the wrong Test Read More